一、用途
电缆用于额定电压0.6/1,1.8/3,3.6/6,6/6,6/10,8.7/10,8.7/15,12/20,21/35,26/35kV输配电系统。
The cable is used in electric transmission and distribution system operating at rated voltage of 0.6/1, 1.8/3, 3.6/6, 6/10, 8.7/10, 8.7/15, 12/20, 21/35, 26/35kV.
二、型号及名称(见表1)Model and name(see table 1)

|
一、用途Usage
本产品适用于交流50Hz,额定电压0.6/1KV 的线路中,供输配电能之用。
The cable is used as power distribution and transimssion line at rated voltage 0.6/1KV which can be fixed installed.
二、使用条件Exploitation conditions
1)电缆导体的最高额定温度为70℃。
2)短路时(最长持续时间不超过5s)电缆导体的最高温度不超过160℃。
3)敷设电缆时的环境温度不低于0℃,最小弯曲半径应不小于电缆外径的10 倍。
1)The long-time working temperature of cable should not be highter than 70℃.
2)When core is in short-circuit(max 5s) the temperature should not exceed 160℃.
3)While installation the ambient temperature should not be lower than 0℃,and the bending radius radius should not be less than 10 times of outer diameter of cable.
三、型号、名称和使用范围(见表1)Model,name and application(see table 1)
|